Fiber Optic HDMI Cable Fiber HDMI Cable Supports 4K@60Hz
4:4:4/4:2:2/4:2:0USD $29.99
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
ATZEBE Fiber Optic HDMI Cable 6ft, Fiber HDMI Cable Supports 4K@60Hz, 4:4:4/4:2:2/4:2:0, HDR, Dolby Vision, HDCP2.2, ARC, 3D, High Speed 18Gbps, Slim and Flexible HDMI Fiber Optic Cable…
Matters Need Attention:
* Please test the cable whether will it display/ works or not before you install. ( Please direct from source device connect to display devices to test ).
* Not all TV supports HDCP 2.2 or 4K 60HZ, some TV access to HDCP 2.2 or 4K 60HZ, no image or image static, and TV does not support HDCP 2.2 or 4K 60HZ. HDCP 1.4's TV can't use HDCP 2.2.
* Please kindly reminder the signal of HDMI is transmit both video and audio in sync at the same time, so the audio will not come out when you turn off the monitor. So please do not turn off your monitor. Hope you were know the HDMI signal function. Must video and audio in sync at the same time, please do not turn off your monitor.
* When handling, when setting up, do not let the fiber-optic cable be affected by great impact and side pressure, so that the shell itself will be deformed, which may cause the fiber to be stuck when in use, and the resolution will be reduced. Or there may be the worst interruption. In addition, after construction wiring will also occur broken line, so need to pay attention.
* Check the appearance and performance of the optical fiber before installing the wiring. Please test the reconstruction on the equipment you need to use to avoid unnecessary trouble at the later stage.
* When wiring, please be careful not to tie, or force pull the fiber, or use feet and other heavy objects to press the fiber, the process of breaking through the wall should not be more than 200N, if the fiber is broken, or the core broken, the optical fiber can no longer be used.
* The optical fiber should have a small amount of surplus at the turning point, make a good drop bend at the corner, do not let the optical fiber touch sharp objects, the surplus optical fiber should be wound reasonably and beautiful, when winding the fiber, the force should be uniform, and the optical fiber should not be subjected to hard bending. So as not to damage the fiber.
* When moving, use a line card to be fixed firmly, one at a distance of 1: 15 meters, do not stretch too much between fixed positions, leaving room for thermal expansion and cold shrinkage, and in addition, in order to prevent damage to the optical fiber in the vertical alignment, Stick tape between fixed line cards once.
* To prevent deterioration and breaking of the internal fiber, always ensure minimum bending semicircle. When laying, because you pull the cable, pay attention to torsion and tension to ensure that the bending radius is above 40mm.
* When laying the cable, pay attention to the angle of the machine, etc., be careful not to touch the sharp angle of the machine and equipment.
* Note when reseating the HDMI connector. When inserting or removing the connector, gently insert it with the connector part. If tension or force is applied, it may lead to breakage, broken wires, faults.
Be careful not to twist the cable and do not apply tension on the internal fibre Channel while loosening the cable.
* The HDMI connector cannot be suspended, the connector's junction will be deformed, and the internal fiber may be disconnected.
* When handling excess cables, follow the circle winding above the diameter of 80mm and do not apply pressure to the connector junction.High Speed 18Gbps ATZEBE HDMI Fiber Optic Cable is made of high quality glass fiber for pure signal transmission. Can ensure the full 18Gbps signal transmission without signal loss. Noted Do not add any switch or other extender device to work with the cable at the same time. Multi-transfer will result in HDMI signal loss. Features Fully supports 18Gbps bandwidth and 4K 60P 444 with HDR10 and Dolby Vision. Noted Your SOURCE devices and DISPLAY devices both are must be support these feature, If you want this fiber hdmi cable to work with these feature. Durability & Flexible 24K Gold-plated plug is strong conductivity and stable signal.Slim and flexible cable with bending radius more than 20mm for easy installation in tight areas. Compatible Devices ATZEBE Fiber Optic HDMI Cable can connects 4K BLU-RAY PLAYERS, SMART 3D, MEDIA PC, Apple TV, PS4, PS3, XBox One, XBox One S, Roku Ultra, Laptop to 4k UHD TV, 4K UHD Monitor, 4K UHD Projector, 4K UHD Displays and more. Noted It must be installed in the correct direction The Cable with Source plug for connecting HDMI Out devices(Blu-ray player, STBox, Xbox one etc.) Display plug for connecting your HDMI display devices(TV, Projector,Monitor etc.). 2 Years Warranty ATZEBE Fiber Optic HDMI Cable provide a unconditional two-years hassle-free warranty, you can get full refund or replacement for free if quality problem. Any questions please do not hesitate to contact us via amazon at first. We will provide our best service and solution to you. Note Please read the product description below carefully before ordering.
Matters Need Attention:
* Please test the cable whether will it display/ works or not before you install. ( Please direct from source device connect to display devices to test ).
* Not all TV supports HDCP 2.2 or 4K 60HZ, some TV access to HDCP 2.2 or 4K 60HZ, no image or image static, and TV does not support HDCP 2.2 or 4K 60HZ. HDCP 1.4's TV can't use HDCP 2.2.
* Please kindly reminder the signal of HDMI is transmit both video and audio in sync at the same time, so the audio will not come out when you turn off the monitor. So please do not turn off your monitor. Hope you were know the HDMI signal function. Must video and audio in sync at the same time, please do not turn off your monitor.
* When handling, when setting up, do not let the fiber-optic cable be affected by great impact and side pressure, so that the shell itself will be deformed, which may cause the fiber to be stuck when in use, and the resolution will be reduced. Or there may be the worst interruption. In addition, after construction wiring will also occur broken line, so need to pay attention.
* Check the appearance and performance of the optical fiber before installing the wiring. Please test the reconstruction on the equipment you need to use to avoid unnecessary trouble at the later stage.
* When wiring, please be careful not to tie, or force pull the fiber, or use feet and other heavy objects to press the fiber, the process of breaking through the wall should not be more than 200N, if the fiber is broken, or the core broken, the optical fiber can no longer be used.
* The optical fiber should have a small amount of surplus at the turning point, make a good drop bend at the corner, do not let the optical fiber touch sharp objects, the surplus optical fiber should be wound reasonably and beautiful, when winding the fiber, the force should be uniform, and the optical fiber should not be subjected to hard bending. So as not to damage the fiber.
* When moving, use a line card to be fixed firmly, one at a distance of 1: 15 meters, do not stretch too much between fixed positions, leaving room for thermal expansion and cold shrinkage, and in addition, in order to prevent damage to the optical fiber in the vertical alignment, Stick tape between fixed line cards once.
* To prevent deterioration and breaking of the internal fiber, always ensure minimum bending semicircle. When laying, because you pull the cable, pay attention to torsion and tension to ensure that the bending radius is above 40mm.
* When laying the cable, pay attention to the angle of the machine, etc., be careful not to touch the sharp angle of the machine and equipment.
* Note when reseating the HDMI connector. When inserting or removing the connector, gently insert it with the connector part. If tension or force is applied, it may lead to breakage, broken wires, faults.
Be careful not to twist the cable and do not apply tension on the internal fibre Channel while loosening the cable.
* The HDMI connector cannot be suspended, the connector's junction will be deformed, and the internal fiber may be disconnected.
* When handling excess cables, follow the circle winding above the diameter of 80mm and do not apply pressure to the connector junction.
Returns Accepted for this item if it's within 30 Days
Price type
IN STOCK
OUT STOCK
.
